Author Archives: Author

What Causes a Drain to Get Clogged?

clogged sink filled with water

Dealing with a clogged drain

The holidays are coming up and that usually means a lot of cooking and baking, which means clean-up. The excitement and fun of holiday baking overrides the dread of the clean-up part, it’s just part of the process. That whole process can come to a standstill when you have a clogged drain though. 

When you’re in the middle of baking fudge and rolling cheese balls, cleaning a clogged drain is not something you want to deal with, but unclog you must! The best way to avoid that this year would be to know what the causes of clogged drains are and avoid them. When you know what causes a drain to clog and how to keep it from happening, it can make your holiday baking much easier and pleasant! 

How does a clogged drain happen?

There are different causes for bathroom clogged drains and kitchen clogged drains.  This article, we’re going to focus on the kitchen clogged drain. A clogged drain in the kitchen sink typically happen when we’re cooking and there is cooking grease or oil poured into the drain. It cakes onto drainpipe walls, then when detergent soap and un-dissolved food particles are poured down the drain, it will gunk up and then you got a clogged drain. 

Lack of venting can cause a clogged drain too. Vents allow air to enter the drainpipe as it drains. When there is enough air entering the vent, the drain works properly, but when there isn’t enough venting, the sewer gas can’t escape and a what appears to be a clogged drain happens. Venting affects the bathroom more than the kitchen plumbing, but if you have a clog down in the main pipe going to the sewer, you could suffer the effects of it in the kitchen too. 

What to use to clean blocked drain?

If you have a clogged drain in the kitchen, here are few suggestions on how to get that clog out so that you can get back to your holiday baking: 

  • Try plunging with a cup-style plunger. Most small clogs can be dislodged in this matter. Make sure the is water in the sink so that the plunger head is covered. Keep the head of the plunger tightly sealed against the drain opening and rapidly plunge up and down. 
  • If that doesn’t clear the clogged drain, clamp off the dishwasher’s flexible hose, and try this plunging process again. 
  • Still have a clogged drain. Pour a half-gallon of boiling water into the sink. If you still have a clogged drain, wait 30 minutes for that water to cool down in the drain, then repeat with boiling hot water.
  • If there is still a clogged drain, check the garbage disposal by turning it on. This can often break up the clog, but if it doesn’t make sure it hasn’t overheated and check the reset button. If the button is pushed, try running the garbage disposal again. 
  • An all-natural method to try if you still have clogged drain is a  baking soda and white vinegar mixture. Combine one cup of each and with one drain covered (a double sink), pour the mixture in the other drain and let set fifteen minutes. Then allow hot water to run for fifteen minutes.

If all of these efforts fail, try your wet dry vacuum and if that fails, call your local plumber. You may have to pay a holiday or weekend rate, but it may be worth it to get your holiday baking done. 

Is Drano really bad for pipes?

Professional plumbers will rarely recommend using an over-the-counter drain cleaner like Drano. Plumbers have been called to homes to fix the extensive damage that a product like Drano causes. Two major problems when using Drano: 

  1. While Drano is sitting in the pipe to open the clogged drain, it is also eating away at the glue holding the pipes and the pipes themselves. 
  2. Drano is unpredictable when used in combination of other products or with equipment like an auger plunger. The chemical mixture that is sitting on top of the clogged drain will splash up and can burn the eyes or skin of the person holding the auger or plunger. 

How do you unclog a drain naturally?

A few options to try to open a clogged drain that is all natural products are: 

  1. Boil half a gallon of water and add 2 or 3 tablespoons of liquid dish soap then slowly pour the mixture in the drain. This works best on grease clogged drains and may take several rounds to get the clogged drain open.
  2. Pour half a cup of baking soda into the clogged drain then pour half a cup of vinegar. Place the drain plug on and wait one hour. Remove the plug and pour one gallon boiling hot water and keep adding more boiling hot water until the clogged drain opens. 
  3. Pour one-fourth cup salt, one-fourth cup Borax, and half cup of vinegar into the clogged drain, followed by one gallon boiling hot water. Let the mixture sit one hour and then rinse down with tap water running for a few minutes.
  4. Mix half cup of baking soda with half cup of salt and pour into clogged drain. Allow to sit for thirty minutes then add gallon of boiling hot water. 
drain cleared

Can too much baking soda clog a drain?

No, baking soda and vinegar create a natural reaction for a clogged drain that doesn’t eat the pipe or build up pressure. What if none of these tricks work to unclog your kitchen drain? Well, you’ll have to call a professional plumber. Your next question is “How much does it cost to clean a clogged drain?” and the answer to that is “It depends.” Pricing can vary from area to area, but nationwide, the average plumber will charge $150 to $200 to open up a clogged drain. This will cover the search for the clog and open the clog.

Sometimes, professional drain cleaning is necessary. Need expert plumbing services in Bedford, TX? Call (817) 283-0183 today.

How to tell if you have a slab leak

crack water leak

What causes a leak in the slab?

Before we discuss how to tell if you have a slab leak and what a slab leak detection is, let’s explain what a slab leak for those is that those that may not understand.  The slab is what they build your home on, the concrete foundation. The home builder will run sewer and water lines before they pour the slab. 

Over time, those lines will deteriorate, break or leak, and that is what results in a slab leak.  Slab leaks also result from a chemical reaction between the metal and the soil or faulty installation.  Many times, it is the soil shifting under the slab, a common problem in this part of the southern part of the United States.

How serious is a slab leak?

A slab leak may start out as a minor matter, but left unattended, it can cause serious problems inside and outside of your home.  Often, before a homeowner realizes they have a slab leak, they have paid for it financially through higher electric and water bills. If you realize you have unexplained higher utilities, a professional slab leak detection can be an enormous help. When a slab leak is left unattended, the following issues can happen:

  • Carpeting and flooring ruined: When water has been seeping through the floor, it will begin to weaken the flooring, cracking tile, saturating the floors, and soaking the carpeting.
  • Musty odor: A slab leak left unattended will create musty odor into your home. If the slab leak is from the sewer line, your home will overtake by the smell of raw sewage.
  • Mold growth. As the water seeps into your home from the foundation, the drywall and wood frame will absorb that water where it will grow mold and other bacteria. These growths are harmful to the health of you and your family, even the family pets. 

Now that you know what can happen inside your home from without slab leak detection or repair, let’s review what happens in the exterior.

  • Foundation damage:  Where slab leak detection isn’t used, it compromises the structural integrity as it weakens the concrete and steel supports. Eventually, the slab leak and water pressure will cause the foundation to shift, can could lead to a cracked or collapsed foundation.
  • Yard damage:  Sometimes a slab leak comes from pipes that run underground through your yard. This will rot the grass and ruin your landscaping. Any brick or concrete driveways, paths, or walkways will crack, and swimming pools can crack. 

How do you find a leak under a slab?

Well, if you aren’t fortunate enough to have slab leak detection equipment, there are some slab leak signs that are a hint of potential slab leak. Here is how to spot a slab leak:

  • Damp spots in the floor: Leaking water lines will create damp spots on the floor and if the leak is from the water heater, the spots will be warm. Best slab leak detection you can have is walk around bare-footed. 
  • Sound of rushing water: If you hear water rushing underneath the flooring, you don’t need any slab leak detection equipment to know you have a slab leak. 
  • Water bill increase:  A broken water line allows water to run continuously and that will raise your water bill. If you’ve noticed that your water bill jumped up a large amount from one month to the next, you need a plumber with slab leak detection equipment and experience. 

A sewer line slab leak is more challenging to detect and will go unnoticed until the damage is severe. One of the most visible signs that you have a slab leak is if portions of your flooring are buckling. This would mean your slab is heaving from a water leak. 

How does slab leak detection work? 

There are elusive slab leaks that can only be found with slab leak detection equipment and slab leak testing with specific methods and a variety of equipment used for slab leak detection and tracing, such as static pressure testing, camera pipe inspection, and sonar. Another slab leak detection used by plumbers today is helium detection equipment. The water is turned off and the air is pumped into the lines. The air forces any water still in the lines to come out where the slab leaks may be.  These slab leak detection methods give a plumber a more exact sign where the leak is within the slab so they can go right to the problem. In years past, it required the plumber jack hammering a home’s slab until they found the leak. 

Slab foundation

How much does slab leak detection cost? 

As with anything, pricing can vary from house to house, region to region. A city plumber may charge more for a slab leak detection in town than a rural plumber would for a house out in the country.  Because they will have to work with concrete (the slab), they will need to use any of the equipment we’ve mentioned here, and the process is sometimes time consuming, depending on the size of the house. 

Typically, the rates in this are start around $150 and can reach $400 or more. Some plumbers charge by the job, others by the hour.  You want to verify this pricing before they do the work so there aren’t any more surprises than the slab leak.  When it comes to repairing the leak, you can expect that cost to start around $2,000 and go up from there. 

There are many things that you need to be aware of as a homeowner, and slab leaks are one of them. To protect your home, be aware of the indications we’ve discussed here and once you have any suspicions of a slab leak, call a qualified plumber with slab leak detection equipment and experience. Call (817) 283-0183 today for slab leak detection in Bedford, TX.

What is the most frequent failure part in a typical faucet?

drip from faucet

Why is my faucet still dripping?     

Most of us have heard the phrase “got a faucet leaking like a sieve”, or maybe that’s a Texas phrase.  What it means, to those who never heard the phrase, the water faucet is no longer dripping, it is now a constant stream of water coming out, even though the faucet is turned off. This is annoying, wasteful of a natural resource, and it is costing you money! A faucet repair is usually something pretty simple that anyone can do, read on: 

You may not realize it until you have a dripping or leaking faucet, but we use them every day, all day. They indispensable in our daily lives at home, at work, at any structure that has running water. This is why faucet repair is important to keep them in proper working order. 

A dripping or running faucet can disturb your sleep, increase the water bill, and if a faucet repair isn’t done soon, it can go from an annoying level to a catastrophic level.  The following are typical issues that can cause a dripping or leaky faucet. 

The O-Ring:

At the top of a cartridge faucet handle, there is a stem screw that holds the handle in place. Under that stem screw is a small disc referred to as the O ring. This is one of the main places that a drip will begin. The O ring becomes loose or simply wears out over time. This can be replaced easily, usually without having to turn the water off.  regular use, causing the faucet to drip near the handle. This faucet repair can be done by replacing the damaged O ring will fix it if this is the issue. 

The Valve Seat:

The valve seat is what connects the faucet to the spout, creating a compression mechanism. In this area, sediment from the water accumulates and corrodes the valve seat which leads to the spout leaking. This is the faucet repair job for either an experienced homeowner or hiring a professional plumber. 

The Washer:

Another common area for a dripping compression faucet because of constant use wears it out. Each time you turn the faucet on, the washer is forced next to the valve seat, creating a constant friction. That constant friction wears out the washer and the result is dripping water around the spout. This faucet repair is done by replacing the worn-out rubber washer. can be mended by replacing the washer. 

If the washer is installed wrong, even the least bit askew, or isn’t the right size, the faucet will still leak. You can try to replace it again, maybe even adjust the washer you installed, or call a professional plumber.

Is a leaky faucet dangerous?

If you’re asking that the faucet repair in bathroom that you’ve ignored for the last six months will flood the world, no. Right now, it may be nothing more than an annoying dripping or leaking faucet, but at some point, you need to address the issue. If not for your own sanity and water bill, but for the good of the world. Yes, your lack of not getting that faucet repaired is contributing to a shortage of one of our natural resources. 

Approximately, 10,000 gallons of water is wasted in every American home each year according to the United States Environmental Protection Agency. That is enough water to fill an average sized swimming pool. What is the most common issue of this much wasted water? 

  • Dripping Faucet
  • Leaking Toilet Flapper
  • Leaking Faucet Valves

Each of those things can be an easy faucet repair, usually by the homeowner, and definitely by a professional plumber. If that doesn’t give you a wake-up call to get those things fixed, then think about this:  That dripping or leaking faucet is costing you an additional as much as 10% more on your water bill.  Other dangers that are possible by not getting that faucet repaired: 

As a homeowner, you are most likely familiar with the various tasks and projects that it takes to keep your home in great condition and maintain its visual appeal and functional quality. Unfortunately, with some many things to keep track of as a homeowner, you might find it difficult sometimes to keep track of what is a priority and what isn’t. This can be the case especially when it comes to your home’s plumbing fixtures. To help highlight the importance of taking care of these kinds of issues right away, and not putting them off until it is more convenient, we have put together a short list of the top four dangers that can arise from ignoring a leaky faucet.

  • Wasted Water: Maybe being eco-friendly isn’t a concern of yours but take a moment to realize how much waster your home could be wasting for others that are concerned. Conserving energy is something that every homeowner should be concerned about, whether it is fresh water or their waste that could e recycled.  That one leaking faucet can be wasting almost 4,000 drips in one day, equal to one liter of water.  
  • Rusting: Metal and moisture are not friends, so by ignoring that faucet repair your bathroom needs, you’re allowing moisture to be exposed to the metal under your sink and house. This is going to start rusting the metal piping inside and under your house. When that rust builds up inside the plumbing lines coming from the steel pipes, valves get clogged. Then you go from that annoying drip or leak to pipes busting because of rust. 
  • Rotting: That faucet repair you’ve been ignoring has probably already stated affecting the surfaces that surround it.  The cabinets, countertops, flooring, and walls are at risk of getting warped, cracked, and rotted from that continuous drip or leak. Not only is this rotting and warped wood unappealing, but dangerous by causing the cabinetry and floors to become weak and unable to support the items you have on them. 
  • Mildew and Mold: That leaking faucet will result in mildew and mold growth inside your home, an unattractive feature that is also dangerous to the health of your family. You’ll notice a musty odor, or maybe see stains around that leaking faucet.  By ignoring that faucet repair, your family could develop breathing issues or skin irritations. When that happen, that faucet repair has become an urgent matter. 

How do you fix a slow dripping faucet?

That leaking faucet in the bathroom or kitchen is wasting water and money. This can be a simple repair even the newest DIYer by following these steps to do your own faucet repair: 

  • Step One: Turn the water off under the sink or at the main line outside your home, typically at the water meter. 
  • Step Two: Take any decorative handle parts off by prying up with a flat-head screwdriver. Under that you’ll find a screw, remove gently with the same screwdriver.
  • Step Three: Using a wrench, loosen the nut and you’ll find the stem screw. Remove it and examine to see if there is any damaged in the area.  
  • Step Four: If no obvious damage, look at the O-ring and washer. Replace both. Make sure they fit properly, or you’ll still have a leak.  
  • Step Five: Now reassemble carefully in reverse order you removed it all, then slowly turn the faucet on to test. If you still have a leak, time to call a professional plumber for faucet repair job. 

If your faucet is a single handle, a leak will require to repair faucet ball, which is a bit more entailed and best to call a professional plumber. 

faucet flowing normally after replacement

Will replacing a faucet stop it from leaking?

No matter how hard or far you turn the faucet handle on the bathroom sink, it won’t quit dripping. Does this mean you need a new faucet? Not necessarily.  You can follow the steps we listed above and attempt a faucet repair job yourself or call a professional plumber. 

If you’ve done what you can or had a plumber attempt a faucet repair and there is still a drip or leak, you should replace the faucet. Keep in mind, if it is not assembled and installed properly, you may still have a drip or leak. If you don’t feel confident doing this yourself, it is worth calling a professional plumber to install a new faucet.

What happens if you don’t fix a leaky faucet?

We covered this earlier in the article, and all of it can be avoided or minimized by addressing any faucet repair as soon as it is noticed, no matter how small the drip may seem. The damage from excess moisture from a dripping or leaking faucet can be costly in many ways. Not only for you personally, but it will cost the Earth a natural resource. 

If you’re experiencing low water pressure, it isn’t always because you need a faucet repair. Low water pressure can sometimes be caused by a water line break. That break could be under your house or in the water line running from your house to the water main.  Or it could be a break in the city’s water line affecting all the homes in the area. A clogged aerator can cause a kitchen faucet to have low water pressure, or a clogged cartridge. These are basic faucet repairs that any homeowner can do with a little patience and video watching! For your faucet repair needs in Bedford, TX, call (817) 283-0183 today!

What Do I Do If I Smell Gas?

What Do I Do If I Smell Gas?

Are you wondering what you should do if you smell gas in the home? This is a very pertinent question because it relates to your personal safety, and the safety of your family and neighbors. Please review the following list to find out more.

  • Are you smelling natural gas? Natural gas smells like rotten eggs or sulfur. If you happen to smell natural gas inside or outside of the home, it is urgent that you act accordingly.
  • If you smell natural gas near your stove, turn off your stove and the gas line, and open all of the doors and windows in the home. Evacuate the premises and call 911. Calling an emergency hotline will help you get appropriate assistance with your gas leak crisis.
  • The fire department or the gas company will visit and should inspect the home. Once it is deemed safe to enter, it will be important for you to find the cause of the smell. That is where HEB Plumbing can provide assistance.

A qualified, licensed plumber who specializes in gas line repair will have the appropriate qualifications to inspect your gas line and complete the necessary repairs. The more training and licenses a plumber has, the safer the processes.

gas leak

Can Leaking Gas Kill You?

If you inhale a high concentration of natural gas it can be very bad for you. Inhaling natural gas can lead to asphyxia. The symptoms of asphyxia include fatigue and chest pain. When carbon monoxide replaces the oxygen that would normally be inhaled by the lungs, oxygen deprivation takes place. This is naturally extremely hazardous and can kill individuals.

What are the Signs of a Gas Leak In Your Home?

The physical symptoms of a gas leak can be difficult to ignore if they are occurring in your household. Common physical symptoms of suffering from a gas leak include headache, dizziness, nausea, eye and throat irritation, fatigue, breathing problems, and more. If an individual comes into contact with compressed or liquid gas, they could get blisters or pale skin.

Can You Smell a Gas Leak?

Interestingly enough, natural gas does not have a smell to it. For safety purposes, utility companies add mercaptan, which is a harmless chemical, to the gas. Mercaptan smells like rotten eggs and sulfur. This pungent smell helps homeowners and inhabitants identify when there is a gas leak and creates an opportunity to avoid catastrophe.

Will a Carbon Monoxide Detector Detect a Gas Leak?

Unfortunately, carbon monoxide detectors are not capable of detecting natural gas leaks unless otherwise stated. As previously mentioned, however, natural gas companies will often put an additive in the natural gas that gives it the smell of rotting eggs or sulfur. Because this smell is so pungent, it is relatively easy for inhabitants of the home to locate the smell.

Gas leak in House

Gas line repair and installation are very important for the function and efficiency of a home. If you suspect that your home has a gas leak, it is urgent that you evacuate the home immediately and dial 911. Once your gas company or fire department has located the source of the gas leak and secured the home, it is important for you to next call a reliable, licensed, and insured plumber. Gas lines are similar to plumbing lines, but require experience and finesse, which will be important to keep in mind.

Gas Leak Near Meter

Do you have a gas leak near your meter? The process will be very similar and straightforward to a gas leak in the home. It is urgent that you contact 911 as soon as possible and have the source of the gas leak accurately diagnosed. 

Gas Leak Without Smell

Natural gas does not have a smell. That means that a tiny leak would be practically impossible to detect. Additionally, it is difficult to discern a small hissing sound if it is at all present. Mercaptan is the chemical that helps individuals identify gas leaks.

gas leak

Gas Leak Near Water Heater

Are you wondering what causes gas leaks near water heaters? The answer is fairly simple. Over time, the seal between the gas water heater and the gas line can degrade and loosen. This process will cause small amounts of gas to leak over time. In addition, it is important to consider rust buildup, faulty gas valves, and cracked sealants which can all result in a gas leak. That is why it is important to have yearly plumbing inspections if at all possible. Regular household inspections of all the plumbing fixtures will greatly assist in navigating any potential gas leak problems.

Do you believe that you have a gas leak in your home? Do you require professional assistance? Our friendly operators at HEB Plumbing are available now at (817) 283-0183. Find out more about what we can do for your gas leak in Bedford, TX.

How do you tell if your drain is clogged?

Person cleaning dishes in kitchen sink

When the drain works slowly

That really seems like a silly question doesn’t it?  “How do you tell if your drain is clogged?”.  Simple, the water isn’t going down the drain would be the indicator you have a clogged drain. One of the most aggravating things you can have happen! You’ve got dishes stacked up, company is coming, and both sides of the sink are full of water that isn’t going anywhere. 

A better question would be, “How did I get a clogged drain in the kitchen?”. That’s typically caused by what you’ve poured down the drain: 

  • Grease – It may have appeared to be liquid when you poured it in the drain, but it coagulates once it’s in the pipes and water hits it. Then, POOF, you have a clogged drain. 
  • Coffee grounds & Eggshells – These substances get heavy when they get wet, and if they’re poured on top of grease, that’s been poured down the drain, you will have one major clogged drain. 
  • Beans, Pasta, Potatoes, and Rice – These may good meals for your family, but the kitchen drain doesn’t like them. When water gets mixed with them, you end up with a paste-like material coating the pipe insides and then a clogged drain.   

When it comes to bathroom drains in the sink and tub, the normal culprits are grime, hair, and soap scum.  Then there is the toilet – what clogs a toilet? Well, there are a few things that cause that clogged drain and you will notice a common element between all these things we’ve listed: 

Low-Flow Toilet

They design toilets today as a low flow with the goal of saving water, a natural resource and a contributor to the monthly water bill. The earlier low flow toilets from the 1990s did not have the pressure necessary to clear the drain and internal trap, thus a clogged drain would happen. If your toilet is from the 1990s or before, that is probably why you’re having a frequent clogged drain. No need to rush out and buy a new one, but until you do, minimize what it flushes in the toilet.

Non-Flushable Items

Believe it or not, not everything that is paper material for the human body is meant to be flushed in the toilet. We’re talking about disposable diapers, feminine hygiene products, cotton balls, cotton swabs, dental floss, wet wipes, and even toilet paper is iffy.

Trap Is Blocked

The curved part of the toilet base on the back sides is the trap. It holds water from flushing down so that sewer gases can’t escape into your home. Guess what?  When you flush those non-flushable items, even toilet paper, it can become clogged in the trap and then you have a backed-up toilet because it now has a clogged drain. 

Blocked Plumbing Vent

Roof vents are required on houses today, especially for the modern toilets and other plumbing fixtures. They fresh air is funneled into the plumbing system to prevent a vacuum with air-pressure that slows a drain flowing. These vents can get blocked by animal nests, leaves, and small sticks, causing you to have a clogged drain. 

Problems with Main Sewer Line

If you are noticing regular clogged drains throughout your house, and you’ve checked the roof vent, then it could be something wrong at the main sewer line.  On your side of the line, it could be from those items we’ve mentioned that shouldn’t be flushed, or it could be tree roots have busted through a pipe. 

How do you dissolve hair in a drain? 

If the sink or tub isn’t draining, you probably have a clogged drain with hair and soap scum. If you’re wondering what product to buy that will break up that clog, try one of these “natural’ cleaners first: 

  • Baking Soda, Vinegar, and Water: Boil some water and pour it into the clogged drain. Mix one-fourth baking soda with one cup water and pour that into the clogged drain. Wait 15 minutes, then pour boiling water in the drain again. You should see a free running drain now.  If not, repeat the process or try one of these: 
  • Baking Soda, Salt, and Water: This time mix one cup of baking soda with 1/2 cup of salt and pour down the clogged drain. Allow to sit overnight as it fuzzes up and dissolve hairballs. The next morning, pour two cups of boiling water into the clogged drain. 
  • Household Bleach: You want to avoid chemicals, but sometimes a clogged drain needs some chemical muscles. A clogged drain bleach therapy won’t harm your pipes while it dissolves the hair balls.  Pour one cup of liquid bleach into the clogged drain and let it sit 30 minutes. If there is still clog there, pour another cup of bleach.  Wear gloves and goggles while doing this to protect your eyes and hands.
  • Hook It or Snake It: Tried and true, this old method still has one of the highest success rates in removing hair from clogged drains. Most people will use a wire clothes hanger or any item that is firm, thin and has a curved end.  You can also purchase a plumber’s snake at your local home improvement store.   

If none of these remedies work, you need to call a professional plumber. The clogged drain may be more than hair and soap scum. 

How do you unclog a deep clogged?   

Purchase an auger at your local home improvement store and follow these steps. This should get your deep clogged drain clean and get the water flowing again.

  1. Take the drain cap off.
  2. Push the auger down into the drain and turn the auger handle clockwise.
  3. Push the auger into the clogged drain firmly.
  4. Pull the auger back, the clog will break apart as you do.
  5. Push the auger into the drain again, repeating the process.
  6. Once you feel you have pulled out the blockage, completely pull the auger out. 

If this doesn’t get your clogged drain opened up again, call your local plumber. The problem could be deeper than you realize. 

Why is my drain still clogged? 

If water is draining in the sink and not the tub, or vice versa, it could be the clogged drain is past where the drains meet.  This may take the services of a professional plumber that can get use his camera to find the clog.  It could be the vent on the roof is blocked, which is something you could check yourself if you don’t have a problem climbing a ladder to look.  Otherwise, a plumber would be the one to call. 

drain working correctly

How do plumbers clear blocked drains? 

Plumbing professionals have equipment, tools, and skills to help them find where clogged drains are clogged. Some techniques they use to unblock a drain once they find it are: 

  • Tree roots: A clogged drain is often caused by tree roots bursting through the drainpipe and blocking it. A professional plumber will have the right equipment and skills to clear the tree roots, patch the pipe, and get your drain running again. 
  • Camera inspection: Plumbers today have added a video snake to their tools. This allows them to inspect a system on a wireless monitor to determine the nature of the clogged rain inside the pipes. From that, they can determine how they need to approach the problem.   
  • Cable clearing: Among the variety of tools that a professional plumber has, the basic hand snakes are still around and they also use a powerful drain machine to clear larger sewer pipes and eliminate clogs.
  • Hydro jetting: A newer method that not all plumbers are on board with and many will make it their last resort to clear a clogged drain and sewer. 

How do you flush a drain? 

Whether or not you’re having clogged drain issues, flushing the drain 2 or 3 times a year is always a good idea to keep it from happening.  Pour half a cup of baking soda and half a cup of vinegar into each drain, then run hot water in the drain for a few minutes.  This may foam up while it is clearing any debris, killing bacteria, and removing odors. 

Plumbing is a necessity that we have all grown used to having. When you need quality drain unclogging services in Bedford, TX, HEB Plumbing is here for you. Give us a call today at (817) 283-0183

What Are the Signs of a Gas Leak in Your Home?

What Are the Signs of a Gas Leak in Your Home?

Homeowners should be aware that there are a number of signs and symptoms to be aware of when it comes to a possible gas leak.

  • The smell of rotten eggs or sulfur.
  • A whistling or hissing sound near a gas line.
  • The gas pipe is damaged.
  • Dead houseplants.
  • Bubbles in the water.
  • A dust cloud, or a white cloud near a gas line.

If you have witnessed one or more of these signs or symptoms, it is important for you to contact a reliable gas line repairman and follow organized protocol. This protocol includes evacuating all family members and pets from the home. The doors should be left open, and you can call the local fire department or your gas company.

A gas leak can impair the function of your home.

Can a Gas Leak In Your House Kill You?

A gas leak in your home has the propensity to kill you or individuals in the home. That’s why it’s so important to find and diagnose gas leaks before they cause trouble in your household. A natural gas leak in your home can increase the chance of fire and explosions since gas provides fuel for the fire. Any electrical sparks or sources of fire in the home could ignite into an explosion provided that the opportunity is presented. While it is true that natural gas is advertised as a safe and clean-burning energy source, it is important for homeowners to be aware of the risks.

What Do I Do If I Smell Gas

If you smell gas, there are a number of things that you can to increase your personal safety. According to a national safety website, the first thing that homeowners should do is open doors and windows in the home to let in the fresh air. The next thing that should be done is to turn off the gas at the mains tap, which is usually near the gas meter. Next, it is recommended that all individuals leave the property. That includes pets. Finally, homeowners can call the gas company, or their local fire department to notify them that there is a gas leak in the home.

Can A Gas Leak Make You Sick?

Gas leaks can make individuals sick. Gas leaks can manifest in symptoms of sickness in individuals. Gas contains carbon monoxide, which can lead to carbon monoxide poisoning in people and animals. As previously noted, gas leaks increase the risk of fire and explosion in your home. At low levels, hydrogen sulfide gas has an odor that is similar to rotten eggs. Normally, natural gas does not have a smell. The smell of sulfur is chemically added to natural gas to help homeowners recognize the smell. Regardless, it is important to note and remember that gas leaks are very bad and should be addressed immediately.

Does Natural Gas Smell Like Skunk?

The smell of skunk, or rotten eggs, is a chemical additive that is called mercaptan. It is chemically added to natural gas to alert homeowners of danger in the household. 

Can Gas Leak Make You Dizzy

Gas line repair and installation is vital in circumstances where you think you may have a gas leak. With regard to the question of whether gas leaks make you dizzy, it is important to consider what the composition of natural gas is. Natural gas is mostly made out of methane, but it also contains small amounts of ethane, propane, butane, and pentane. You may ask what methane is. The answer is that methane is a combination of hydrogen and carbon. It’s formed when animals and plants are trapped beneath the layers of sediment in the earth.

What is Gas Leak Repair

For both safety and efficiency reasons, it is important for gas lines to be in perfect working order. Because gas is very bad for individuals to inhale, it can cause dizziness, health problems, and even death. Gas leak repair is performed by qualified, certified and insured specialists who know how to repair and replace gas lines. 

How to Report Gas Leak

According to where you are in the world, it is possible to call the authorities. Each nation and state has a slightly different number. Please take the time to research the gas leak service in your area. It is also a welcome opportunity for you to find the numbers of the local fire department and your gas utility company.

A gas leak can be very dangerous

Can Gas Leak Cause High Blood Pressure

There are a number of different symptoms that can affect individuals. These symptoms include headaches, dizziness, nausea, fatigue, breathing problems, and pale skin or blisters, which occur when the skin comes in contact with compressed or liquid gas. High blood pressure may or may not occur after prolonged exposure. However, it is never good to be exposed to natural gas for any length of time.

Have you experienced one of these gas leak issues? Our friendly operators at HEB Plumbing are available now at (817) 283-0183 to schedule an inspection for your gas leak in Bedford, TX.

Where Does My Sewer Line Run?

sewer line

Understanding Your Property’s Plumbing

If you’ve got a clog or a leak in your sewer system, it can be a real pain. We’re not talking about your run of the mill toilet clog or leak. This has more to do with a chronic plumbing issue that’s causing you pain. If you’ve got recurring clogs, a suspiciously high water bill, or some other major plumbing issue, the problem may be more complex. Find the connection of the sewer line to the house plumbing. The sewer line and main drain are a good place to start when you’re trying to locate the problem.

What are Sewer Lines?

Sewer lines are an important part of every residential and commercial plumbing system. They run bathroom and other waste outside through a network of underground pipes that feed into municipal waste management facilities. When something goes wrong, the hope is that you can find someone who can repair the sewer line without digging. However, sometimes that’s not possible.

How Does the Sewer Line Work?

Most of the time, sewer lines rely on gravity. Pipes from your house or an office building flow downward into pipes buried underground. Those pipes flow into a sewer main that runs down under streets and roads. If you’ve seen manholes around your city or town, they are access points to the sewer main for when maintenance or repair needs to be done.

As more waste is collected, the sewer pipes lead into larger and larger pipes. When necessary, pumps or lift stations help push waste and water uphill mechanically until they can, for example, get over a hill or some other higher elevation.

What Are the Signs of a Broken Sewer Pipe?

You don’t have to be a licensed plumber to spot problems with your sewer line. What causes the sewer line to back up is nothing special. Usually, it’s too much grime build up over time or something was flushed down a toilet that wasn’t supposed to be.

Most of the time, there are one or more symptoms that indicate a leak, some of the most common signs are:

  • A foul odor coming from your sink or toilets.
  • Your drains may be emptying unusually slow.
  • Chronically clogged drains or toilets.
  • Mold and mildew
  • Wet patches on your lawn or around your house.

How Do I find the Sewer Line on My Property?

It’s hard to self-diagnose a broken sewer pipe. You’re probably going to need professional help. If you’re wondering, “How deep is the sewer line in my yard?”, a plumbing technician can help with that or any other issue. Typically, plumbers and pipe repair specialists will have televising and other tools that can help them locate your sewer line and the problem before any digging is necessary.
However, if you’re wondering how to find your sewer line yourself, here are a few tips:

Find your main drain – The main drain from your house ties into your sewer line. You can start by locating your septic tank and following the pipes from there.

Call the previous owners – If you don’t know where to start looking, give the previous owners of your house a call. Odds are they’ll know where the sewer main is and can point you in the right direction.

Inquire with the local utility – The city or county government where you live keeps maps of municipal plumbing systems for their infrastructure projects. The building and safety division is likely to have copies of your home layout as well. Give them a call and ask if they can help.

Listen to water flow in your house – If you listen carefully, you can hear the water flowing through your pipes after a toilet is flushed. Have someone else at home flush a toilet and stand in the basement or lower level and try to follow where the sound of water is going.

Call a professional plumber – If all else fails, call a professional plumbing service to come to do an inspection. They’ve seen every plumbing system possible, so we will be able to locate your main drain and sewer main in no time.

How Deep is the Sewer Line in My Yard?

When people have plumbing trouble, they’re rightfully concerned about their home or commercial property. They wonder how long repairs will take and if their plumbing or water is going to be put out of commission temporarily.

One of the biggest worry property owners have is whether any digging is necessary to get the sewer problem fixed. The last thing you want is to start a sewer line repair and end up looking for heater parts replacement because something else was broken. If the problem is with the main sewer line, though, digging is likely. A sewer line’s depth varies from property to property. They often range anywhere from 18 inches to 6 ft deep depending on the home’s elevation, the soil underneath the ground and the location of the city sewer main that it leads into.

HEB Plumbing has been helping property owners in Bedford, TX with all of plumbing needs for years. If you have questions about your sewer line, call today at (817) 283-0183!